SOLDERINGSoldering Iron Tips: Ultimate Guide

Soldering Iron Tips: Ultimate Guide [2022]


soldering iron tips

In this article we will give you the best soldering iron tips to you:

You’ve just purchased a soldering tool to use for DIY Projects but aren’t sure which to choose between, either a chisel or conical tip? Or maybe you want to perform some intricate work but aren’t sure that you won’t be able to do it with the knife tip you already have? We attempt to address these concerns and others that you might have about tipping off the soldering iron.

Soldering is when two or more items are joined by melting non-ferrous metals, known as a filler in the joint. This is accomplished with the soldering iron. The soldering iron is constructed from a copper core plated with iron. It can be removed and reused. There are a variety of tips in the marketplace. First, let’s examine the different types of tips offered and their applications, sizes, prices, and cleaning techniques.


                        Types Of Soldering Iron Tips

Soldering iron tips can be used for various applications ranging from creating circuit boards to making jewelry. This article will look at the most popular tips for soldering.

1. Conical or B-series Tips

soldering iron tips

Conical Series Tips get called because of their pointed cone-like design. Because it has a conical tip, soldering may be carried out from any angle, and therefore, it is used for general purposes.

2. Chisel or D-series Tips

soldering iron tips

The name”D-series” model is due to its shape, which is similar to a chisel. Like conical iron, tips are utilized for general-purpose soldering.

The surface area is bigger when compared to conical tips. This means that more heat can be transferred to an electrical device through the point. For DIY projects that are quick and easy tips, this is the one you should choose. They can be particularly useful in the process of soldering wires with thicker diameters.

The tips are available in various sizes, so you need to select one that is the right size. If you select one that is too big, it could end up with solder flowing from one place to another, creating a type of bridge. If it’s too small, it will not help you get to all the points you need to.

3. Knife or K-series Tips

soldering iron tips

The tip of the knife soldering iron is slanted with a tip that resembles the shape of an axe. It is perfect to drag-solder and fixes solder bridges. It’s not difficult to perform point soldering using this technique. However, it’s a lot more difficult contrasted to other methods.

4. Bevel or C-series Tips

soldering iron tips

There are tips called Bevel or C series tips that are utilized for drag soldering because they can help hold on to more solder. Its surface is curved, which resembles an unground chalk piece or pencil. You can apply solder along the edge and small amounts to various locations, regardless of whether they are from each other or within proximity.

5. Needle or I-series Tips

soldering iron tips

The I series, also known as the needle soldering iron tip, is well-defined and designed to perform extremely detailed work. It’s not suitable for soldering big components since it can transfer relatively less heat than other tips.

6. Specialized Tips

Certain manufacturers produce specialized soldering iron tips, e.g. spade tips are employed to remove UV glue off glass surfaces, such as the LCD.

Picking The Right Soldering Tip

Here are some tips for selecting the right tip for your soldering iron.

  • Select a tip compatible with the soldering iron you have.
  • Select the appropriate kind of soldering you prefer based on whether or not you want to perform extensive work, general-purpose or general-purpose soldering, or drag.
  • If you’re not sure, it won’t be enough heat transfer, and when it’s too large, you may damage the board.

Do not choose conical tips if you’re beginning to learn about soldering. Beginning users tend to apply greater pressure to increase sales of the solder. This is which is a common mistake that can cause damage to the board.

Select chisel tips that are perfect for wire, through-hole de-soldering, or surface mounts.

soldering iron tips

Things to Keep In Mind While Soldering

  • Be careful not to apply excessive pressure because it could cause damage to the tip or the board.
  • Do not apply force to the edge (using the tip as a screwdriver or to remove components).
  • If you’re beginning and are not sure of your abilities, you should make sure you use the lowest temperature to prevent excessive wear and tear.
  • Shut off the soldering station or iron when you’re not making use of it.

Taking Care of Soldering Iron Tips

Inadequate maintenance of the iron’s tips for soldering is the primary cause of issues with soldering. To ensure that your soldering tool lasts longer, you should look at the following tips.

Use High Quality Solder

One of the most effective ways to ensure that your item stays longer in use is to use high-quality solder. Poor quality solder is contaminated with impurities that build up during use, causing problems with heat transfer.

Select a good brand and try the solder out by melting it at your preferred temperature. A good quality solder will melt quickly and completely at the temperature recommended. Be sure to read the manufacturer’s directions to see what the solder should be expected to perform.

Maintain Optimal Temperature

Soldering station irons are equipped with temperature regulators to aid in maintaining the ideal temperature to prolong the life of the iron tip and the iron. The temperature regulators are able to adjust the temperature, and will do so when it drops lower or over the specified range. Certain soldering irons come with higher-quality temperature control systems than others.

Clean Soldering Iron Tips

Before soldering, wipe your area with a clean cloth and a bit of alcohol. This can remove impurities, like remnants of solder that have been used in previous projects, grease, oxidation, etc. If you have a large piece of contaminant that remains in the area, gently employ the metal wool to scrape it away.

Cleaning wool doesn’t reduce its temperature on the tips. When you’ve cleaned, put on new solder to stop the oxidation. If you want to use a heavy-duty soldering process, it is possible to use polishing bars.

Use Flux To Prevent Oxidation

To stop creating an oxidation layer, it is possible to use the soldering process. Flux is a chemical that disintegrates the oxidation layer. It is available in a paste form. It lets you perform your work without hindrance. 

It is suggested to use an appropriate flux when performing waves soldering. This is followed by intense cleaning. You can also use a non-clean flux. As its name implies, she does not require much cleaning.

soldering iron tips

Tinning Your Tips

Always make sure to tin your tips before and after you have soldered. To “tin” your tip, apply a thin coat of solder. It’s a protective layer that stops oxidation. It assists the solder wire to melt and flow more smoothly and improves heat transfer effectiveness.

When you are done removing the soldering iron, be sure you clean it thoroughly before you put it back within the container. Keep your tips in a tightly sealed container. We hope this guideline has helped you, and keep an eye out for more!


Soldering Benefits as well as Drawbacks: In this article we will discuss the advantages and disadvantages of using soldering. The complete explanation of the advantages of soldering and disadvantages are as the following:


  • It can be operated at low temperatures.
  • Base metal is not able to melt.
  • All metals and non-metals can be joined using this method.
  • This operation was a low-power one.
  • It takes less time to sign up.
  • It is easy to operate.


  • The joint’s strength is lower.
  • This isn’t a good idea when the joints work at high temperatures.
  • It’s not a good idea to use it for long-length welding.
  • Heavy metals aren’t able to be welded with this process.



In this article, we give you the best tips for soldering iron. These tips are handy before you can use them. These products are of good quality, and these soldering irons come in many shapes. The first one looks like a cone design.

If we talk about usability, so many people use the first product, the other is also good, and the others also have different shapes. These products are beneficial in our daily life these can make our works quickly. So if you can buy it, check the tip before you can buy it.

Related Posts

  1. The 5 Best TS100 Soldering Irons Reviews & Buying Guide
  2. The 7 Best Soldering Pencils Reviews and Buying Guide
  3. The 6 Best Soldering Lugs Reviews & Buying Guide
Aizaz khan
Aizaz khan
Aizaz was the first person to get a byline on his blog on technology from his home in Bannu in 2017. Then, he went on to a career in breaking things professionally at my electric sparks which is where he eventually took over the kit as a hardware editor. Today, as the senior editor of hardware for my electric sparks, he spends time reporting about the most recent developments in the hardware industry and technology. If he's not reporting on hardware or electronics, you'll see him trying to be as remote from the world of technology as possible through camping in the wild.


Please enter your comment!
Please enter your name here

Latest news

About Tech

You might also likeRELATED
Recommended to you