Anker has launched a robot vacuum that disinfects floors as it cleans them. The eufy Omni S2 Pro pairs UV-C light with electrolyzed water. Anker calls the combination a world first for a robot vacuum, while it pitches the machine as a health device first.
Anker launched the machine in early November at 1699 dollars, sold through eufy.com and Amazon. EIN Presswire carried the announcement. The price sits at the top of the robot vacuum market, so Anker must prove the health angle is worth it. Rivals keep pushing health claims of their own, and the ROMO robot vacuum leans on local data handling instead.
UV-C light does the first half of the job. Six LEDs shine 275nm light across a 120 degree path under the robot. The light shuts off at once if the robot is lifted, and eyes and skin thus stay safe while the floor gets treated.
Electrolyzed water does the second half. The station turns tap water into hypochlorous acid, which Anker says gives antibacterial protection for up to 5 days after mopping. The idea is simple, because the floor stays cleaner between cleans, not just during them.

Lab testing backs the disinfection claim with a strong number. Anker reports a 99.99 percent reduction against E. coli, S. aureus, influenza virus and Aspergillus niger. That figure comes from lab tests, not from a real home, and buyers thus should read it as a lab result, not a home guarantee.
Size and reach matter in a home full of furniture. The robot measures 326 by 358 by 98mm, while the station stands 387 by 476 by 670mm. It climbs single thresholds of 3.5cm and double thresholds of 7cm, while it handles carpet up to 3.5cm deep. Two deodorizing scents, Crisp Pine and Fresh Lavender, keep the station area pleasant.
Suction power jumps as well. The AeroTurbo 3.0 system peaks at 40000 Pa, up from 30000 Pa on the earlier S2. A five layer cyclone traps 0.3 micron particles and mold spores, while a PHMB filter holds 97 percent suction. That suction figure matches the Ecovacs Deebot T90 Max at 40000 Pa, without the disinfection angle.
Mopping on the eufy Omni S2 Pro gets its own upgrade. The HydroJet 3.0 roller spans 290mm, presses down with 16N of force, and gets flushed 8 times per second by dual scrapers. Dirty water never rides back onto the floor, which is the flaw that ruins many cheaper mopping robots.
The UniClean station of the eufy Omni S2 Pro handles the messy work by itself. It washes the mop with 100 degree water, dries it at 55 degrees, and thus stores up to 100 days of dry debris in a bag. A deodorizing diffuser with two fragrances keeps the station smelling fresh between empties.

Navigation leans on CleanMind AI, a 3D ToF matrix laser system. It recognises more than 360 obstacle categories down to 1cm, day or night, while the laser maps the room continuously. A CornerRover arm extends the side brush and mop into edges and corners that round robots usually miss, while the robot climbs thresholds up to 3.5cm high.
The step up from the earlier S2 is clear. Suction rises from 30000 Pa to 40000 Pa, and the Pro adds UV-C light that the S2 never had. The S2 debuted at CES 2026, and the Pro thus arrives less than a year later with a sharper health pitch. Buyers who own the S2 must decide whether disinfection alone justifies the upgrade.
Allergy sufferers get a formal badge to look for. The eufy Omni S2 Pro carries Asthma and Allergy Friendly certification from the Asthma and Allergy Foundation of America and Allergy Standards Ltd. Few robot vacuums, however, carry that credential. It may matter more than raw suction for sensitive homes, because allergy relief is the whole pitch.
Rivals keep pushing toward health claims of their own. The DJI Romo P shows how crowded the premium shelf has become, meanwhile the S2 Pro tries to stand out on health.
For buyers, the question about the eufy Omni S2 Pro is simple and practical. A vacuum that mops, disinfects and empties itself costs as much as a good phone. For homes with allergies or pets, that price may buy something no ordinary vacuum can offer. Floors end up not just clean, but treated, while the machine does the work itself. That result is the point, meanwhile the price stays premium.
